XKC-C362-3P AutomaticLiquid Level Controller to Control Water Pump's On or Off for Fire Fighting Water Tank Liquid Level Monitering

When the container liquid level is too low, the controller closes the relay to start the pump to add water. When the liquid level reaches a certain level, the relay is automatically stopped to stop the pump
Description More Function Introduction Mechanical Dimension: Application Sample
Working Principle:
XKC-C362-3P non-contact high and low level controller is composed of XKC-Y25-V two liquid level detection heads and a C362 controller to achieve the level control function: when the container level is too low, the low level sensor is triggered The low-level alarm signal issued triggers the C352 controller to close the relay to start the pump to add liquid level. When the liquid level reaches a certain level, the high-level sensor sends a signal to trigger the C362 controller to open the relay to automatically stop the pump to work in this way. Thus, the function of automatically controlling the level of the container liquid level is realized, and the container liquid level is kept stable.

Application:
Automatic replenishment of water tanks, buckets, water towers and other liquid containers, intelligent pump solenoid valves, fish tank live water control, automatic pumping of domestic wells, automatic industrial equipment level monitoring



Video link for the working principle:
https://cloud.video.taobao.com/play/u/17296513330/p/1/e/6/t/10301/240667220102.mp4


Elite Characteristic:

►compatibility with contactless level sensor input can use a variety of control;
► strong protection ability, with anti-slip protection and pump water overflow detection output, comes with 4 hours     overtime pumping alarm;
► relay dry contact output, suitable for a variety of load control;
► the control diversification can be manual or automatic mode to control the pump;
► easy to install, can be installed positioning screws rail mounting electrical boxes;

Basic Parameter:
Model: XKC-C362-3P
Name: C352 high and low level automatic controller
Input voltage: AC100V-220V, 50 / 60Hz
Operating voltage: DC12V
Current job: working current ≤110 mA, static current consumption ≤20mA
Load power: 1.6KW or less (for three-phase pump overload or the need to install AC contactor)
Alarm output: 800W (resistive load) normally open normally closed output
Output: normally closed or normally open relay AC AC110V / 220V (please leave a message, the default setting to send 220V)
input signal Low sensor signal input;High induction signal input;
Pump idling detection signal;
Water overflow alarm signal input;
Sensing head interface voltage: DC 12V
Working temperature: -10 ~ 75C
Dimensions: 115 * 90 * 40

aeProduct.getSubject()

Wiring Diagram:
















 

♦The water level control: low water level below the sensing probe, the pump automatically starts to rise, to the high water level, automatically shut down the pump.
♦ idle delay to stop the pump: After starting as detected no water supply pipe, the delay of 3 to 5 minutes, turn off the pump. Pumping process, where there is disruption of water flows more than 3 seconds, then immediately turn off the pump.
♦. The automatic tracking of water: two hours after idling the pump stops pumping water once every start the pump until the water filled pump stops.
♦ pumping overtime protection: Continuous automatic pumping over five hours, automatically stops the pump. Working indicator flashes quickly, press K2 key to stop or delay the automatic recovery standby.
♦ Manual and automatic switch: The controller automatically enters the default boot mode, press K1 key to switch the operating mode, the red light for the automatic mode to manual mode the red light off.
 ♦ The non-contact sensing probe: non-contact capacitive sensing technology and a dedicated sensor control chip design, the probe has a durable, strong anti-jamming capability, sensor sensitivity, not in contact with the liquid, corrosion resistance, safety and non environmental pollution.















 















Water level controllers are widely used in industrial boilers, ponds, water towers, water tanks for civil construction, and in open or closed storage tanks and underground tanks in petrochemical, paper, food, and wastewater treatment industries. The detection medium can be water, oil, acid, alkali, industrial sewage and other conductive and non-conductive liquids. It forms a set of advanced liquid level display and control equipment with electric valve and automatically opens and closes the electric valve.



The following mainly discusses several typical applications:
1: Application in drainage system
In the drainage control system, the host is installed in the pump room. During work, the host detects the water depth signal in real time, and controls the pump, the upper limit starts the pump, and the lower limit stops the pump. If the water level exceeds the upper limit, or falls below the lower limit, or the pump is faulty, the host notifies the administrator via SMS, and the administrator can view it on the spot, or send SMS instructions to force the pump to start and stop.
Drainage pumping station remote monitoring system is suitable for remote monitoring and management of urban drainage pumping stations. Pumping station management personnel can remotely monitor the working status of the grille machine in the station, the level of the sewage tank, the working state of the pump set, the outbound flow, the concentration of harmful gases in the tank, etc. in the monitoring center of the pumping station management; support manual control, automatic control, Remotely control the start and stop of the grille machine, exhaust fan and lift pump; panoramic view and important stations in the image monitoring station.

2: Application in pool water supply system
In the pool water supply control system, the master is installed in the pool, and the slave is installed in the water source pump room. During work, the host detects the water depth signal of the pool in real time, and instructs the slave to control the pump by SMS. The upper limit starts the pump and the lower limit stops the pump. If the water level of the pool exceeds the upper limit or falls below the lower limit, the host will notify the administrator by SMS, and if the pump fails, the slave will notify the administrator by SMS. The administrator can view it on the spot, or send SMS instructions to force the pump to start and stop.

3: Application in water tower water supply system
In the water tower water supply control system, the main main engine is installed in the water tower, and the sub main engine is installed in the pool pump room. During work, the main host detects the water depth signal of the water tower in real time, and instructs the sub host to control the pump by SMS. The upper limit starts the pump and the lower limit stops the pump. The auxiliary host detects the water depth signal of the pool in real time, assists in controlling the pump, and stops the pump at the lower limit (water shortage protection). If the water level of the water tower exceeds the upper limit or falls below the lower limit, the main host will notify the administrator by SMS. If the water level of the pool is below the lower limit or the pump fails, the secondary host will notify the administrator by SMS. The administrator can view it on the spot, or send SMS instructions to force the pump to start and stop.












Review

1/3
X